2,200 Psi Pressure Washer Pump Face 2817ERA

Pump face for Union Power UP-150, Munro PW55 and Howard pressure washer HPPW552200.

These pump faces crack for 2 reasons.

1. The pump if left running for more than two minutes without the lance being used heats the water inside the pump to boiling point. If the lance is then released the hot water that was in the pump chamber leaves through the lance and replaced by cold water. This cold water cools the pump body to quickly and causes the aluminum pump to contract to quickly against the brass Allen bolts and can cause this cracking.

2. Pressure relief valve faulty. Either the top seal on the pressure has come out of it groove causing the valve to stuck and not working. This excess pressure can also crack the pump body. (The seal can come away from its groove when the engine is over revved).

A pressure relief valve fault due to over revving of the engine. The valve can be twisted and not in true straight line causing it to stick and not operate.

If changing the pump face it is also recommended to change the pressure relief valve at the same time. 

Just need a spare pressure washer replacement lanceReplacement 2,200 Psi Pressure Washer Pull Cord 4.0 HP 5.5HP and 6.5HP
 

 For all other postage zones please go Here to purchase your zone postage