Plumbers Wall Block Hole Cutter 150mm TCT Core Drill Bit with SDS Shank DR046

Professional quality 150mm TCT core drill bit with SDS shanked arbour with pilot drill bit.

This Hole Cutter will cut to a depth of 50mm.

Used correctly (high speed and low pressure) you will have many uses for the hole cutter and core bits.

Heavy duty tungsten carbide tipped core drills 50mm cutting depth. For cutting fast perfectly clean holes in, concrete, breeze block. light to medium density bricks, blocks and masonry.

How to use

These dry TCT core bits are to be used obviously dry and with high speed and low pressure.  Low pressure is essential to prolong the life of the cutting tips and get a clean straight cut.

Attach the bit to you drill and place the pilot drill in the centre of where you want to drill. Start slowly so the pilot drill can get a firm grip and keep dead centre. Once the core bit has cut into cutting surface to 1/8’’ of an inch remove it from the hole. Then remove the pilot drill as this has now done its job.

You then place the core bit into the hole and using high speed and low pressure will make very light work of cutting the hole.

When drilling, keep moving the bit in and out in the hole. Moving the core bit in and out of the hole is essential for removing the cuttings.

Job done. Simple as that.

Specification

• SDS shank
• TCT cutting tips
• 150mm cutting width
• 50mm cutting depth
• Pilot drill
• Arbour
• Overall size: 150mm (W) 167mm L (excluding pilot)180mm L (including pilot)
• Weight: 1.75 kgs

Diamond Core Drill Bits
150mm TCT Core Drill Bit with SDS Shank
125mm TCT Core Drill Bit with SDS Shank
110mm TCT Core Drill Bit with SDS Shank
80mm TCT Core Drill Bit with SDS Shank
65mm TCT Core Drill Bit with SDS Shank
 

 For all other postage zones please go Here to purchase your zone postage